GET QUALIFIED ON YOUR TERMS! STUDY ANYTIME, ANYWHERE AND STAND OUT FROM THE CROWD!

MEM40119 – Certificate IV in Engineering (Blended)

Kyle Showing Paper

Hands up if industry changes threw a spanner in your career progression? 

With many people looking for jobs right now, you might be worried about how stable yours is.

Are you indispensable at your company or are you easily replaced? 

Or maybe you know another team member that is looking to get their skills to the next level? 

You don’t deserve to worry about the stability of your job. 

You don’t deserve to worry about how to keep food on the table for your family. 

What you do deserve is to know that because your skills hold you in high esteem with your colleagues and employer, you NEVER HAVE TO WORRY AGAIN!

So what kind of skills would an employer be looking for?

THAT PERSON IS YOU with your Cert 4 in Engineering (Fluid Power)!

If you aren’t sure that you are ready to take the next step in your career, have a look at what some of our past students have had to say!

Travis

Toowoomba, QLD

“Trainer has very good knowledge of hydraulic systems and explains very clearly"

John

Maitlan, NSW

“All questions were answered. Time was taken to explain things as best as possible. Great guys delivering course"

Steve

Mudgee, NSW

“The trainer was very experienced. learnt a lot of new things about hydraulics"

Certificate IV in Engineering is the next step in the career of a Mechanical or Electrical trades person.

It covers specialised skills in specific technical areas, such as maintaining fluid power systems, condition monitoring along with reporting and analysis.

WHAT YOU GET

Trainers online to answer all questions you might have about the course content and assessment

Work anywhere! Have your qualifications recognised anywhere in Australia.

*once all course prerequisites have been met

With APT training you get hands-on experience working on real machines so that you get the full experience of working with hydraulic systems.

We also show you industry leading technology and equipment to make you work safer and more efficient.

APT AND YOUR JOURNEY

The certificate IV in Engineering is the next step in your career as a mechanical and electrical tradesperson.

And our blended delivery model allows you the flexibility to complete your training anytime anywhere! As long as you have an internet connection you’ll be able to complete the theoretical components needed to achieve your Cert IV.

During this time if you have any questions or need support our trainers will be there to help. Whether via email or a quick zoom meeting they will get you the answers you need to continue on your training journey.

Interactive Boards
Kyle and Allan

Then take it to another level, when you are onsite (at our office in Toronto NSW). You will be assigned to a trainer/mentor for all of your practical components as well as to run you through the theoretical knowledge you need to excel as a fluid power expert.

They are there to help explain assessments and answer any questions you have face to face, so that you have as much chance as possible to succeed in the program. 

All trainers have a strong background in hydraulics and fluid power and will be able to help pass their expert knowledge on to you.

Jobs

HOW DO I GET STARTED?

There are 3 entry pathways into the MEM40119 – Certificate IV in Engineering (Fluid Power):

1. Direct Entry – this is for students who have attained MEM30219 – Certificate 3 in Engineering – Mechanical Trade or MEM30319 – Certificate 3 in Engineering – Fabrication Trade. Generally this will be trades who completed their apprenticeship in the last 10 years.

Must have the following units included on their transcript, these units are pre-requisite for the units selected in our MEM40119 – Certificate 4 in Engineering (Fluid Power) Course:

  • MEM09002 Interpret technical drawing
  • MEM12023 Perform engineering measurements
  • MEM18001 Use hand tools
  • MEM18002 Use power tools/hand held operations
  • MEM18003 Use tools for precision work
  • MEM18006 Repair and fit engineering components
  • MEM18055 Dismantle, replace and assemble engineering components

2. Mechanical Trades with Previous Qualificationswill need to go through an Recognition of Prior Learning (RPL)  process to complete the Cert 3 Level units

3. Other Trades – this is for other trades. This involves RPL for the Certificate3 level units prior to commencement in the Certificate 4 in Engineering

Before you begin, you will have the support of our trainers so that you are fully aware of the process prior to commencing.

UNITS

The following units will be covered in the theoretical and practical components of this course:
*Core, Pre-requisite and other units are required to meet the requirements of the Qualification.

  • MEM18010 – Perform equipment condition monitoring and recording
  • MEM18011 – Shut down and isolate machines/equipment
  • MEM18018 – Maintain pneumatic system components
  • MEM18019 – Maintain pneumatic systems
  • MEM18020 – Maintain hydraulic system components
  • MEM18021 – Maintain hydraulic systems
  • MEM18022 – Maintain fluid power controls
  • MEM27006 – Diagnose and rectify batteries, low voltage sensors and circuits
  • MEM27017 – Maintain, fault find and rectify hydraulic systems for mobile plant
  • MEM27024 – Diagnose and rectify mobile plant hydrostatic systems

PRE-REQUISITES

Units of Credit (previously completed) required:

  • MEM09002 Interpret technical drawing
  • MEM11011 Undertake manual handling
  • MEM12023 Perform engineering measurements
  • MEM12024 Perform computations
  • MEM13015 Work safely and effectively in manufacturing and engineering
  • MEM14006 Plan work activities
  • MEM16006 Organise and communicate information
  • MEM16008 Interact with computing technology
  • MEM17003 Assist in the provision of on-the-job training
  • MEM18001 Use hand tools
  • MEM18002 Use power tools/hand held operations
  • MEM18003 Use tools for precision work
  • MEM18006 Repair and fit engineering components
  • MEM18055 Dismantle, replace and assemble engineering components
  • MSMENV272 Participate in environmentally sustainable work practices

If you are unsure about your completion of any of these prerequisites please feel free to contact us to discuss your options. Even if you haven’t completed all pre-requisites we can help you find the best way to complete your Cert IV in Fluid Power.